doc. no : qw0905-LUY13633 rev. : a date : 31 - may - 2005 super bright round type led lamps ligitek electronics co.,ltd. property of ligitek only data sheet LUY13633
page 1/4 part no. LUY13633 package dimensions ligitek electronics co.,ltd. property of ligitek only directivity radiation note : 1.all dimension are in millimeter tolerance is ? 0.25mm unless otherwise noted. 2.specifications are subject to change without notice. 25% 100% 75% 50% 0 25% 50% 75% x -60 -30 x 0 x 30 x 100% 60 x 25.0min 2.54typ 1.0min ?? 0.5 typ 13.2 9.9 1.85 1.5max 10.7
ligitek electronics co.,ltd. property of ligitek only unit mw g a ma ma uy ratings symbol 50 90 10 120 i f i fp ir pd page 2/4 parameter power dissipation reverse current @5v peak forward current duty 1/10@10khz forward current part no. LUY13633 absolute maximum ratings at ta=25 j j j -40 ~ +85 t opr tstg tsol max 260 j for 5 sec max (2mm from body) -40 ~ +100 typ. min. 6200 3400 max. 2.6 15 lens 595 spectral halfwidth ??f nm forward voltage @20ma(v) viewing angle 2 c 1/2 (deg) luminous intensity @20ma(mcd) dominant wave length f dnm soldering temperature storage temperature operating temperature emitted yellow part no LUY13633 material algainp note : 1.the forward voltage data did not including ? 0.1v testing tolerance. 2. the luminous intensity data did not including ? 15% testing tolerance. typical electrical & optical characteristics (ta=25 j ) water clear color electrostatic discharge esd 2000 v min. 1.7 LUY13633*0 2 12
ambient temperature( j ) fig.4 relative intensity vs. temperature relative intensity @20ma wavelength (nm) 500 0 0.5 550 600 650 ambient temperature( j ) fig.5 relative intensity vs. wavelength fig.3 forward voltage vs. temperature forward voltage@20ma normaliz @25 j -20 1.0 -40 0.8 20 060 40 1.0 0.9 1.1 1.2 0.5 relative intensity @20ma normalize @25 j 100 80 -40 -20 0 020 3.0 2.5 2.0 1.5 1.0 80 60 40 100 ligitek electronics co.,ltd. property of ligitek only fig.2 relative intensity vs. forward current forward current(ma) part no. 4.0 fig.1 forward current vs. forward voltage typical electro-optical characteristics curve 100 forward current(ma) 0.1 1.0 10 1.0 forward voltage(v) 2.0 3.0 1000 uy chip relative intensity normalize @20ma 2.0 1.5 1.0 0.5 5.0 0 1.0 10 3.0 2.5 page3/4 100 1000
reference standard mil-std-883:1008 jis c 7021: b-10 jis c 7021: b-12 mil-std-750: 1026 mil-std-883: 1005 jis c 7021: b-1 page 4/4 description test item operating life test low temperature storage test high temperature storage test 1.under room temperature 2.if=20ma 3.t=1000 hrs (-24hrs, + 72hrs) 1.ta=105 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) 1.ta=-40 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) test condition this test is conducted for the purpose of detemining the resisance of a part in electrical and themal stressed. the purpose of this is the resistance of the device which is laid under ondition of high temperature for hours. ligitek electronics co.,ltd. property of ligitek only part no. LUY13633 reliability test: mil-std-202: 107d mil-std-750: 1051 mil-std-883: 1011 mil-std-202:103b jis c 7021: b-11 mil-std-202: 208d mil-std-750: 2026 mil-std-883: 2003 jis c 7021: a-2 mil-std-202: 210a mil-std-750: 2031 jis c 7021: a-1 this test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. 1.ta=65 j? 5 j 2.rh=90 %~95 % 3.t=240hrs ? 2hrs high temperature high humidity test thermal shock test solderability test solder resistance test 1.t.sol=260 j? 5 j 2.dwell time= 10 ? 1sec. 1.t.sol=230 j? 5 j 2.dwell time=5 ? 1sec 1.ta=105 j? 5 j &-40 j? 5 j (10min) (10min) 2.total 10 cycles this test intended to see soldering well performed or not. the purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. the purpose of this test is the resistance of the device under tropical for hous. the purpose of this is the resistance of the device which is laid under condition of low temperature for hours.
|
